Vlan; Vlan Static List; To Create A New Vlan Group - Longshine LCS-SW1420S Manual Del Usuario

VLAN

The VLAN is a group of ports that may spread around the network but communicate
as though they belong to one subnet. By using IEEE802.1Q compliant VLAN, all ports
can be reorganized into separate broadcast domains for security reasons and reduce
bandwidth occupation instead of using routers to divide whole network into subnets.
It produces cleaner network environment by reducing broadcast traffic and simplify
network management by allowing you to move devices to another VLAN without
changing physical connections.
However, before enabling VLAN , pay attention to
· All ports are default to VLAN 1 and assigned PVID 1
· All the ports of a Aggregation Group must be treated as an integer when added
to/deleted from a VLAN

VLAN Static List

This screen is used to Add / Remove / Modify VLAN and up to 255 groups. The
VLAN groups that have been created are all listed here.

To create a new VLAN group

1. Specify the name for the new VLAN group (VLAN name is only used for
identification)
2. Enter a number (VLAN ID) for the new VLAN group
3. Check the "Active" box to activate the VLAN or leave it blank and activate it
afterward
4. Click <<Add button to create the new VLAN
E-37