Longshine LCS-SW1420S Manual Del Usuario página 41

To change the PVID
1. Double click the "PVID" column of a port
2. Input a new VLAN ID (1~255)
3. Press "Enter" to submit the value
4. Click Apply button to apply it
Note
1. All the ports are default as members of VLAN 1 and assigned PVID 1
2. The port which was assigned a PVID and the PVID is equal to VLAN
ID, removing the port will not allow until you change it
3. Automatically, a port will join the VLAN of its PVID, and if the
VLAN does not exist, system will create it
E-40