en
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare on our sole responsibility that the products Mirka® PROS 150 mm (6") & 125 mm (5") Pneumatic Random
Orbital Sander (see "Technical data" table for particular model) to which this declaration relates are in conformity
with the following standard or other normative document: EN ISO 15744:2008 . Following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC .
Jeppo 31.10.2018
Place and date of issue
Operating instructions include:
Exploded view, Parts list, Declaration of
conformity, Important, Required personal
safety equipment, Please read and comply
with, Warning, Caution, Additional safety
warnings, Technical data, Proper use of
tool, Work stations, Operating instructions,
Maintenance, Troubleshooting guide,
Reducing vibrations with pad saver or
interface .
We reserve the right to make changes to this manual without prior notice .
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool . Keep these
instructions in a safe, accessible location .
Required personal safety equipment
Read
operator's manual
Warning: Potential hazardous situation that may result in death or serious injury and/or property damage .
Caution: Potential hazardous situation that may result in minor or moderate injury and/or property damage .
Please read and comply with
• General Industry Safety & Health Regulations, part 1910, OSHA 2206, available from:
Superintendent of Documents, Government Printing Office, Washington DC 20402
• Safety Code for Portable Air Tools, ANSI B186 .1 available from:
American National Standards Institute, Inc ., 1430 Broadway, New York, New York 10018
• State and local regulations
50
Mirka® PROS • 150 mm (6") • 125 mm (5")
Company
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel . +358 20 760 2111
Fax +358 20 760 2290
www .mirka .com
Wear
safety glasses
ear protection
Wear
Wear
safety gloves
Stefan Sjöberg, CEO
Wear
face mask