Set The Scale To Zero; Using The Tare Function (Tara); Switching Off The Scales; Resetting The Scales - ADE KE 1702 Instrucciones De Operación

Resetting the scales

Set the scale to zero

If the display still shows values even if the weighing surface is empty (e.g. if the scales
are not optimally positioned or a TARE value is still displayed, see next section), you
must set the scales to zero.
− Briefly press T l

Using the tare function (TARA)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scales.
1. Press T l
in order to set the scales back to "0".
If the weight in the weighing bowl exceeds 50 grammes, the "TARE" is
displayed (tare function).
2. Add the new substance. The weight of the added substance is shown on the display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scales

− Hold down T l
The scales automatically switch off if they are not used for approx.
60 seconds.
Resetting the scales
Reset the scales to factory settings if unusual or obviously incorrect values are shown
on the display.
1. Remove the batteries from the battery compartment and wait a moment.
2. Re-insert the batteries. Pay attention to the correct polarity of the batteries (+/-).
After switching the scales on, you can start weighing as usual.
18
1x.
until the indicator on the display goes out.
Kitchen scales KE 1702