Operation; Weighing; Resetting The Scale To Zero; Using The Tare Function (Tara) - ADE KE 1800-1 Instrucciones De Operación

Operation

Operation

Weighing

1. Place the scale on an even, firm, and dry surface. Carefully position the scale in order
to avoid hard impacts to the sensors/feet and therefore to avoid damage.
2. Press tare to switch on the scale.
3. Choose the desired unit of measurement by repeatedly touching unit.
You can choose between "kg" (kilogramme), "g" (gramme), "oz" (ounce), and
"lb" (pound). Pay attention to the indicator on the display.
4. If you want to weigh something in a container, now place the container without
anything in it onto the weighing surface. Otherwise, proceed as described in
point 6.
5. Press tare. "0" is shown on the display.
6. Put the substance to be weighed in the container or place it on the weighing
surface. The measured weight is shown on the display.
7. Read off the measured weight and remove the item or substance from the
container or the weighing surface.

Resetting the scale to zero

If the display still shows a minus value (symbol ) even though the weighing surface is
empty (for example, if the scale is not optimally positioned or a TARE value is still
displayed; see next section), you must reset the scale to zero.
− Briefly press

Using the tare function (TARA)

This function is practical, for example, when baking, if you would like to add another
ingredient to the ingredients already on the scale.
1. Press tare in order to set the scale back to "0".
The zero display will flash several times, followed by continuous display. The scale is
ready.
2. Add the new substance.
The weight of the added substance is shown on the display.
3. Repeat the process whenever you want to add more ingredients. The process can
be repeated as often as needed until the capacity limit (5 kg) is reached.

Switching off the scale

− Hold down
tare until the indicator on the display goes out.
The scale automatically switch off if they are not used for approx. 2
minutes.
18
tare 1x.
Kitchen scale KE 1800-1 | 1800-2 | 1800-3 | 1800-4