1
Start playing the disc and press (PTY/FILE)
for two seconds. Then press (PTY/FILE)
momentarily.
Bank edit mode
CD2
DISC
TRACK
5 1
Note
If you have not labeled the disc, you cannot use this
function. For more information on "Labelling a CD",
refer to page 16.
2
Press either side of (SEEK/AMS) to select
the track number you want to skip and
press (SEL).
CD2
DISC
TRACK
5 3
The indication changes from "PLAY" to
"SKIP." If you want to return to "PLAY,"
press (SEL) again.
3
Repeat step 2 to set the "PLAY" to "SKIP"
mode on all the tracks.
4
Press (PTY/FILE) for two seconds.
The unit returns to the normal CD playback
mode.
Notes
• You can set the "SKIP" mode on up to 24 tracks.
• You cannot set the "SKIP" mode on all the tracks.
Playing the specific tracks only
You can select:
• BANK-ON to play the tracks with "PLAY"
setting.
• BANK-INV (inverse) to play the tracks with
the "SKIP" setting.
1
During playback, press (4).
"BANK" appears on the display.
2
Press (4) to select the desired mode.
Each time you press (4), the display
changes as follows:
z BANK-ON
z BANK-INV
CD1
BANK ON
Playback starts from the track following the
current one.
To go back to the normal playing mode, select
"BANK-OFF" in step 2.
z BANK-OFF
BANK
Additional
Information
Precautions
• If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the unit to
cool off before operating it.
• If no power is being supplied to the unit,
check the connections first. If everything is in
order, check the fuse.
• If no sound comes from the speakers of a
2-speaker system, set the fader control to the
center position.
• When the tape is played back for a long
period, the cassette may become warm
because of the built-in power amplifier.
However, this is not a sign of malfunction.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.
To maintain high quality sound
If you have drink holders near your audio
equipment, be careful not to splash juice or
other soft drinks onto the car audio. Sugary
residues on this unit or cassette tapes may
contaminate the playback heads, reduce the
sound quality, or prevent sound reproduction
altogether.
Cassette cleaning kits cannot remove sugar
from the tape heads.
EN
17