HOW TO USE
Operating the dryer
1
Lint Filter
2
3
4
5
6
If the lint filter has not already been cleaned, lift out the filter and remove the lint from the last
load. This will help ensure the fastest and most efficient drying performance.
Load the dryer with the wet laundry from the washer. If the load is extra large, you may need to
divide it into smaller loads for proper performance and fabric care.
Press the POWER button to turn on the dryer. The cycle LEDs will illuminate and a signal will
Turn the cycle selector knob either direction until the LED for the desired cycle is on.
The preset temperature, dry level, and option settings for that cycle will be shown. Refer to page
NOTE
Not all options or modifiers are available on all cycles. A different chime will sound and the LED
will not come on if the selection is not allowed.
Press the START/PAUSE button to begin the cycle. The cycle can be paused at any time either by
minutes, the dryer will shut off and the cycle settings will be lost.
When the cycle is finished, the chime will sound if it is set. Remove your clothing from the dryer
immediately to reduce wrinkling. If
few minutes to help prevent wrinkles from setting in the clothes.
HOW TO USE
CARE is selected, the dryer will tumble briefly every
29