LG DLEX3470 Serie Manual Del Propietário página 27

Connecting electric dryers (cont.)
USA only
WARNING
Three-wire connection for electric dryers: Direct wire
the three wires into a hook shape.
the dryer. Install a UL-listed strain relief into the power cord
through the strain relief.
UL-Listed
3-Wire Power
Cord
Terminal
UL-Listed
Strain Relief
INSTALLATION INSTRUCTIONS
cable.
reinstallation of the dryer.
3. Attach the two hot leads of the power cord to the outer
terminal block screws. Attach the neutral wire to the center
terminal block screw. Connect the external ground (if required
by local codes) to the green ground screw.
. Reinstall the terminal block access cover.
Hot
Ground
Screw
White Wire
from Dryer
harness
External Ground
Wire (If required
by local codes)
27
conductor
Neutral
(White)
Hot
(Red)