Specifications - LG DLEX3470 Serie Manual Del Propietário

42

SPECIFICATIONS

Before calling for service (cont.)
Steam does not
generate but no error
code is shown
Garments still
wrinkled after in dryer.
STEAM FRESH™
There are no creases
left on garment after wrinkles from fabric.
STEAM FRESH™
Garments have
static after REDUCE
STATIC
Garments are too
damp or too dry after
REDUCE STATIC
Garments are not uniformly Number of garments or load size not properly
damp after EASY IRON selected at the beginning of the cycle.
Water drips from door
during Steam Cycle
Steam is not visible
during Steam Cycle
Drum does not turn
during Steam Cycle
Cannot see steam
vapor at the
beginning of cycle
The display shows
Odors remain in
clothing after completely.
STEAM FRESH™
is on during the
drying cycle
TM
FLOW SENSE
indicator shows four restrictions.
bars during the drying
cycle
lint buildup or debris.
the external dryer venting.
SPECIFICATIONS
Description
Electrical requirements*
Gas requirements*
Dimensions
Net weight
Drying capacity
- Normal cycle
- Steam cycle
operation. Some condensation may drip out the bottom of the door.
will normally form on the inside of the dryer door if the steam system is
operating normally.
as a comforter.
Press the LESS TIME button to reduce the indicated load size.
Dryer can be used in this condition, but drying times may be longer.
will remain on for two hours after the end of the cycle. Opening the door or
pressing the POWER button will turn off the display.
Steam Dryer
Please refer to the rating label regarding detailed information.
/
TM
system, the indicator