Programming The Remote; Programming Without A Code; Component Codes - Panasonic CT-32HL43 Instrucciones De Operación

Programming the Remote

The Universal Remote Control can be programmed to
operate many manufacturers' components, using the
component function buttons for VCR, DVD, AUX, RCVR,
TV, DTV CABLE or DBS. Follow the procedures for
programming your Remote Control with or without a code
for the component.
Default Modes for Remote Control
Device Operates
TV
TV (Panasonic Only)
DTV-STB
DTV (Panasonic Only)
CABLE
CABLE (Preset)
DBS
DBS (Preset)
VCR
VCR (Preset0
DVD/CD
DVD and CD (Preset)
Personal Video Recorders,
AUX
Tape and VCR2
RCVR
Audio receiver (Preset)
Note: Determine the manufacturer of the component and look
in the table for the code.
Programming with a Code
Procedure
• Confirm that the external component is plugged
and operating.
• Turn the component off.
ACTION
Press and
•
seconds.
• Press appropriate component button on the
Remote Control VCR, DVD (CD), AUX (VCR2 or
TAPE), RCVR, DTV, CABLE or DBS.
• Enter the 3-digit component code using the
Remote Control numeric keypad (0 ~ 9 buttons).
Press the Remote Control
•
component. If the procedure was successful, the
component will turnon.
Note: If the component does not operate with the Remote
Control, repeat the procedure using another code.
(Some brands have multiple codes). If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
R C
EMOTE ONTROL
Default
Panasonic TV Code
Panasonic DBS Code
Panasonic CABLE
Code
Panasonic DBS Code
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal
Video Recorder Code
Panasonic RCVR code
together, for at least 5
POWER
to test the
POWER
O ( CT-32HL43
PERA TION MOD ELS

Programming without a Code

This procedure searches all codes and is called the
"sequence method."
Procedure
• Confirm that the external component is plugged in
and on.
• Turn the component off.
ACTION
Press and
•
seconds.
• Press appropriate component button on the
Remote Control.
VOL u
Press to move forward to the next code.
•
t VOL
Press to move backward.
Press the Remote Control
•
component. If the procedure was successful, the
component will turn on.
Note: Repeat the above steps until the component code is
found. it may take many attempts before the correct
code is found.

Component Codes

The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all the features found in each
model.
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR DVD
AUX (VCR2) AUX (TAPE)
CABLE DBS
CT-36HL43)
AND
together, for at least 5
POWER
to test the
POWER
DVD (CD)
RECEIVER
AUX (PVR)
17 l