Set Up - RedMax EBZ8500 Manual De Instrucciones

EBZ8500/RH

6. Set up

F1
F2
F3
F4 [EBZ8500RH]
F5 [EBZ8500RH]
US-8
■ BLOWER
1. Connect the blower and pipe with flexible hose.
Clamp both ends of the flexible hose securely
with the hardware supplied with the unit. (F1)
2. When connecting the pipe (2) with flexible hose,
set "UP" mark on the pipe facing upward. (F1)
3. Align the protrusion and the groove provided on
the tube ends and twist the tube until
connection is locked up. (F2)
4. Apply grease to the pipes if necessary.
(1) Flexible hose
(2) Pipe
(3) Clamp
(4) Pipe, straight
(5) Pipe, end
(6) Grip assy [EBZ8500]
NOTE
A light lubricant may be used to ease assembly
of flexible pipe to blower elbow.
■ GRIP
• The position of the Grip can be adjustable back
and forth by loosening "knob bolts" on Grip by
hand. (F3)
(1) Knob bolt
■ THROTTLE LEVER [EBZ8500RH]
• The position of the throttle lever can be
adjustable back and forth by loosening "knob
bolts" on Grip by hand. (F4)
(1) Throttle Lever
(2) Pipe
(3) Knob bolt
■ THROTTLE CABLE [EBZ8500RH]
• Use the clamp to fasten the colgate tube
containing the throttle cable and the power
cable to the hose. (F5)
(1) Clamp
(2) Cable
(3) Flexible hose