Warning Labels On The Machine; Symbols On The Machine - RedMax EBZ8500 Manual De Instrucciones

EBZ8500/RH

3. Warning labels on the machine

4. Symbols on the machine

For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
make a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position: FUEL TANK CAP
(b) The direction to close the choke
Position: INTAKE CUP
(c) The direction to open the choke
Position: INTAKE CUP
US-4
(6)
(1) Read owner's manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly could result in
accidents causing serious injury or death. Read this
manual carefully and practice using the blower until you
are fully acquainted with all operations and have learned
to use it correctly.
(4) Severing of fingers or hand by fan blade.
Do not open or remove safety guards or nets while engine
is running.
(5) Thrown or blown object.
Stay a safe distance from the machine.
(6) Hot surface
Avoid contact the hot surface during and immediately
operation.
IMPORTANT
If warning label peel off or become soiled and impossible to read,
you should contact the dealer from which you purchased the
product to order new labels and affix them in the required
location(s).
WARNING
Never modify your machine.
We won't warrant the machine, if you use the remodeled
machine or you don't observe the proper usage written in the
manual.
■ EMISSION CONTROL
An emission control label is located on the machine.
EMISSION CONTROL INFORMATION
THIS ENGINE MEETS U.S. EPA AND CALIFORNIA
EXH/EVP REGS FOR 2011*
ENGINE FAMILY : BHQZS.0765GE*
EMISSION CONTROL SYSTEM : EXH;EM/EVP;SP*
COMPLIANCE PERIOD :
REFER TO OPERATOR'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
MANUFACTURED:
USE JASO FD OR ISO L-EGD GRADE 50:1 OIL
*1: The year will be changed every year of manufacturing.
*2: The initial will be changed every year of manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
1
S.O.R.E.
2
DISPL.: 76cc
3
300 HOURS