Bestron DCF42BR Manual Del Usuario página 32

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
OPERATION - General
The
appliance
is
only
for
household
purposes,
professional use.
1. Mounting bracket
2. Motor
3. Fan blade (4x)
4. Remote control
5. Remote control receiver
6. Screw set mounting plate (2x)
7. Fan blade screw set (12x)
8. Balance weight
9. Balance clip
10. Fan blade holder (4x)
MOUNTING - Installing the mounting bracket
PLEASE NOTE:
ALWAYS SWITCH OFF THE POWER IN YOUR METER BOX BEFORE STARTING MOUNTING THE
CEILING FAN.
Make sure to hang the fan where the distance between fan blades and the floor will be at least 2.30 m.
1
2
1
A
1. In the package the mounting bracket has 4 screws mounted on (see figure A)
2. Loosen the two screws
3. Then completely loosen and remove the two screws
4. Remove the mounting bracket from the
decorative cover and attach the mounting
bracket securely to the ceiling (D). Make
sure the mounting bracket is mounted
firmly enough to support a weight of at least
10 kg.
5. Now screw the wiring correctly into the
terminal block (E):
Blue wire → N
Brown or black wire → L
Ground wire (green/yellow) →
intended
not
for
2
2
half a turn (B).
1
B
(C).
2
D
32
EN
1
C
E

Publicidad

Tabla de contenido
loading

Tabla de contenido