Bestron DCF42BR Manual Del Usuario página 33

EN
MOUNTING - Mounting the fan blades to the motor housing
1. Take a fan blade holder and place it on a fan blade (see figure F).
2. Thread a screw with a red ring through the fan blade holder and the fan blade.
3. Place the supplied ring and then the bolt on the screw and tighten it properly.
F
4. Remove the two screws at the top of the motor housing (see figure G), then place a fan blade incl. holder
(with the black side down) and screw it tight with the two screws (H).
5. Repeat for the other three fan blades.
G H
The fan blades are now properly mounted.
33