Button Function - Bestron DCF42BR Manual Del Usuario

2. Now slide the receiver into the mounting bracket (K).
3. Connect the connectors of the fan and the receiver, (see figure L).
MOUNTING - Mounting the fan to the mounting bracket
1. Now place the decorative cover over the mounting bracket and screw it on (M).
NOTE: place the cable with sensor in the recess of the decorative cover and then stick it on the ceiling with
the sticker on the bottom.
2. Replace the two screws in the decoration cover and tighten them too (M).
The fan is now properly mounted. You can now switch on the power again in your meter box.
USE - Operation
The fan can be operated with the remote control
included. The device has 3 speeds, each of which
can be operated via a separate button:
fast, medium and slow.
K
M
35
L
BUTTON FUNCTION
0 VENT. ON/OFF
MAX. VENT. SPEED
MED. VENT. SPEED
MIN. VENT. SPEED
EN