Chauvet Professional EPIX BAR 2.0 Guía De Referencia Rápida página 2

ÉPIX™ Bar 2.0 QRG
Safety
Notes
Page 2 of 40
Read all the following Safety Notes before working with this product.
These notes include important information about the installation,
usage, and maintenance of this product.
This icon indicates critical installation, configuration, or
operation information. Failure to comply with this
information may render the fixture partially or
completely inoperative, damage third-party equipment,
or cause harm to the user.
There are no user-serviceable parts in this product. Any
reference to servicing in this guide applies only to
properly certified CHAUVET® technicians. Do not open
the housing or attempt any repairs unless you are
certified by CHAUVET®.
This icon indicates useful, although non-critical
information.
·
Please refer to all applicable local codes and regulations for
proper installation of this product.
·
Always disconnect this product from its power source before
servicing.
·
Always connect this product to a grounded circuit to avoid the
risk of electrocution.
·
Do not touch this product's housing during operation because it
may be very hot.
·
Do not operate this product if you see damage on the housing,
lenses, or mounting bracket. Have any damaged parts replaced
by a certified CHAUVET® technician at once. In the unlikely
event that your CHAUVET® product may require service,
contact CHAUVET® Technical Support.
·
Do not cover the ventilation slots when operating to avoid
internal overheating.
·
The maximum ambient temperature is 104 °F (40 °C). Do not
operate this product at a higher temperature.
·
In case of a serious operating problem, stop using this product
immediately!
EN
ÉPIX™ Bar 2.0 QRG