TOGO
| pushing aid
3.4. Nameplate and serial number
CE Sticker & EAN Codes (Size 80 mm x 23 mm)
The nameplate (fig. 02) and serial number are located on the rear of
Power Wheelchairs (not crash tested)
the recess for the battery unit.
A
A
H
Model: Togo
K
2020-03
UDI
M
Manufacturer logo
A
Manufacturer information
B
A
RoHS-Logo
C
B
Caution! - Follow instructions for us
D
C
CE-mark
D
E
Not suitable for use as a seat in a vehicle
E
F
Important - Follow instructions for use
G
F
Model designation
H
G
Model number
H
I
Maximum user weight
I
J
Date of manufacture
K
J
Maximum laden weight
K
L
UDI number
M
Serial number
N
28
D
C
E
B
Bischoff & Bischoff GmbH
B
Becker-Göring-Straße 13
D - 76307 Karlsbad
F
G
Telefon 0700 - 60007070
I
J
Model-no.: 8010
Max. user weight: 125kg
L
Max. laden weight: 180kg
SN
N
4. Installation
The adapter plate may only be attached by a
qualified medical supplies retailer.
4.1. Push handle height
The height of the push handle can be adapted to the requirements of
the assisting person.
•
Unscrew the plastic nut and pull the bolt completely out (fig. 04).
•
Now you can change the height of the push handle.
•
Push the bolt into the nearest hole and firmly tighten the plastic
nut.
02
5. Using the pushing aid
5.1. Functional description of the
control unit
Having adapted the pushing aid to your personal needs, make yourself
familiar with the functions of the control unit. All control elements can
be operated by an assisting person standing behind the pushing aid.
Key switch
The pushing aid is switched on and off by operating the key (fig. 05).
In addition, the lockable control unit offers reliable protection against
misuse.
Speed levels
The speed can be preset at 6 levels on the rotary switch (fig. 06). For
safety reasons, there is only one level for reversing, at approx. 1.5 km/h.
Control lever
The electrical drive of the pushing aid is activated by operating the
control lever (fig. 07).
Bischoff & Bischoff GmbH | 09.01.2020 - Revision: 1
TOGO
pushing aid |
04
05
06
07
29