Engine Identification; Electrical Equipment; Ruggerini Service - Ruggerini MD150 Manual De Uso Y Mantenimiento

English

ENGINE IDENTIFICATION

A
B
C
D
E

ELECTRICAL EQUIPMENT

RUGGERINI SERVICE

26
The engine identification plate is located on the air conveyor (1, figure 1).
A= (Type) engine type
F
B= (No.) engine serial number
G
C= (Omol.) type approval code
D= (cc) displacement in cm³
The wiring diagram can be found in figure 25 on page 83.
1. Ignition key (optional)
2. Voltage regulator
3. Engine starter
4. Battery (not included)
5. Alternator
6. Pressure switch
7. Battery recharge warning light (optional)
8. Oil pressure warning light (optional)
Correct and constant maintenance of the engine is an essential condition to ensure its
endurance, thus reducing operating costs.
To request servicing or spare parts, contact one of the authorised Service Centres listed
in the "WORLD SERVICE ORGANISATION" booklet you will find inside the bag
containing the accessories, specifying:
- all data found on the engine identification plate,
- kind of intervention.
For any further information, contact Ruggerini Service.
E= (rpm) standard RPM
F= (Version) version
G= (rpm setting) special RPM setting