Garland CHOPPER 607 VE Manual De Instrucciones página 35

DO NOT ADJUST THE MAXIMUM
PRESSURE LIMIT SCREW! The
maximum pressure has been set at
the factory.
Displacement of the blade in both
directions.
Warning! Read the user's manual. To cut a trunk, hold
it in place with the clamps, push both operation levers
down and, as soon as the cutting blade comes into
contact with the wood, slightly loosen the pressure of
the clamps while continuously pressing down on the
levers. This will prevent the clamps (arms) from being
bent.
Use extensions for the feeding
cable with a minimum section
Ø 2,5 mm
of 2,5 mm
2
Do not allow the motor
to rotate in the clockwise
direction, this will
damage the oil pump and
void any warranty rights.
2 .
35/120
Dispose of your appliance organically.
Do not throw in it in domestic trash
containers.
Comply with the CE directives (EU
standards).
English