Toolland DTB10000 Manual Del Usuario página 3

4. Charging the Battery
1. Locate the charging connection on the handle and open the cover.
2. Connect the charger to the charging connection.
3. Make sure the charger plug is well-connected and inserted but do not force.
4. Connect the charger to the mains. The red LED indicates the battery is charging.
When the LED burns green, the battery is fully charged. Disconnect the charger
from the mains to avoid overcharging.
a
V. 01 – 19/03/2020
LED
DTB10000
3 ©Velleman nv