Toolland DTB10000 Manual Del Usuario página 4

5. Operation
1. Open the cap.
2. Pour the liquid into the tank.
3. Close the cap.
4. Press the trigger to release the spray.
5. Turn the spray nozzle to the right to tighten the spray.
6. Turn the spray nozzle to the left to widen the spray.
a
6. Troubleshooting
The appliance does not
start after being switched
The appliance does not
spray when the trigger is
V. 01 – 19/03/2020
direct spray
Problem
on.
pressed.
DTB10000
b
Possible cause
The battery is out of
power.
The power switch is
damaged.
The filter is clogged.
4
wide spray
Possible solution
Fully charge the battery.
The appliance is damaged.
Please dispose of within
the local rules.
Take out the filter and
clean it.
©Velleman nv