Page 8
SB-2-545
TROUBLESHOOTING (continued)
CONDITION
Thick, dimpled finish "orange
peel".
AVAILABLE OUTFITS
COM-PS506B-14-03.............Pressure Assist Outfit with 1QT SS Cup and HVLP Compact Gun
98-3141.................................SG2 Plus Outfit with HVLP Compact Gun
98-3144.................................2-Gal Tank Outfit with HVLP Compact Gun
98-3150.................................1/2" Diaphragm Pump Outfit with HVLP Compact Gun
98-3153.................................Aluminum 2 QT Cup Outfit with HVLP Compact Gun
CAUSE
Gun too close to surface.
Too much material coarsely atomized.
Air pressure too low.
Improper thinner being used.
Material not properly mixed.
Surface rough, oily, dirty.
CORRECTION
Check distance. Normally approx. 8".
Increase air pressure or decrease fluid pressure.
Increase air pressure or reduce fluid pressure.
Follow paint manufacturer's mixing instructions.
Follow paint manufacturer's mixing instructions.
Properly clean and prepare.