Usual Cleaning - deville C07922 Instrucciones Para La Instalación Y El Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
7.3 – Usual cleaning
Clean the window with a wet cloth and ash. If
necessary
use
a
respecting the instructions for use : start the
cleaning once the appliance is completely cold.
Clean regularly the secondary air intake part
(Fig.24).
- Vacuum
dust and the particles stuck between
the air guide and the window glass. If necessary
slip a thin blade or a sheet of rigid cardboard
between the air guide and the glass to make the
cleaning easier (clearing of the particles).
These particles block the making of the secondary
air flow which protects the widow from the direct
contact with smokes and complete the the burning
of the wood.
- Scrape off with the end of a metallic object
inferior edge of the air intake part to remove the
bistre which has settled there.
These operations have to be made as soon as the
window glass is dirty and it is essential to wait for
the complete extinction of the fire within the
appliance to implement them.
If some local and distinct soot patches (Fig. 24)
appear again and multiply, it is necessary to
dismount the air guide to make a more complete
cleaning (Fig. 25) :
. Hang the door out and lay it down.
. Remove the 3 screws.
. Remove the air guide A and clean it.
. Reassemble the whole and check that the
original window kit is respected.
This operation has to be performed by a skilled
professional.
Clean regularly the hot air releases grilles of the
hood.They get filled in all the more easily as their
meshing is thin : choose a suitable frequency of
cleaning.
Check the efficiency of the latch of the door and if
necessary make the following adjustments (Fig.
26) :
- Harden the closing of the door:
. Proceed successively through the loosening
of the screw
. Give the 2 screws a quarter turn and do it
again if necessary.
NOTA : This operation increase the pressure on
the smoke-tight seal of the door of the appliance.
- Loosen the closing of the door:
. Proceed successively through the loosening
of the screw
. Give the 2 screws a quarter turn and do it
again if necessary.
NOTA : This operation decrease the pressure on
the smoke-tight seal of the door of the appliance.
specific
cleaning
product
and the screwing down of
and the screwing down of
the
.
.
21

Publicidad

Tabla de contenido
loading

Tabla de contenido