SOLAC PC1510 Instrucciones De Uso página 6

ENGLISH
Dear customer,
Thank you for deciding to purchase a SOLAC
brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long
product life can be assured.
DESCRIPCIÓN
1. Water tank base
2. Water tank
3. Top cover
4. Filler cover
5. Small top cover
6. Display
7. Up button
8. Down button
9. Cable store
10. Handle
11. Steam activation trigger
12. Continuous steam lock
13. Skirt
14. Soleplate
Read these instructions carefully before
•
switching on the appliance and keep them for
future reference. Failure to follow and observe
these instructions may result in an accident.
INSTRUCTIONS FOR USE
BEFORE USE:
Peel off appliance's protective film.
•
Make sure that all the product's packaging has
•
been removed.
Certain parts of the appliance have been lightly
•
greased, consequently, the appliance may give
off a light smoke the first time it is used. After a
short time, this smoke will disappear.
Prepare the appliance according to the function
•
you wish to use.
FILLING WITH WATER:
It is essential to have filled the tank with water
•
to be able to work with steam.
Open the lid on the filling spout.
•
Fill the tank, taking care to respect the MAX
•
level (Fig. 1).
Close the filling spout lid.
•
USE:
Unroll the cable completely before plugging it
•
in.
Connect the appliance to the mains.
•
Once plugged in, the appliance begins to heat
•
up to its default "·" setting.
The appliance has various ironing programs,
•
DO NOT use temperatures higher than those
indicated on the garments to be ironed.
TEMPERATURE FABRIC
•
Nylon / Chemical Fiber /
Synthetic
• •
Silk / Wool
• • •
Cotton / Linen
To select the various programs just press
•
the "+" and "-" buttons on the digital screen
depending on whether we wish to go up or
down a program number, "-" down, "+" up.
(Fig. x).
Given that the soleplate takes a long time to
•
cool, we recommend starting off with delicate
garments and then increasing the program
setting.
The light flashes until the selected temperature
•
reached, once the temperature is reached the
light stops flashing and remains constant.
If you want to put the product on standby
•
(standby mode), press and hold the "-" button
for 3 seconds, to turn it on again press and
hold the "+" button for 3 seconds.
CAUTION: If the fabric is made up of various
•
kinds of fibres, select the temperature for the
fibre that requires the lowest temperature.
(E.g., select the temperature for polyester for
a fabric made out of 60% polyester and 40%
cotton).
Temperature and steam status are shown
•
on the display (6), when both values remain
steady this indicates that the appliance is
ready for use vapor .
STEAM TRIGGER
The appliance has a trigger (11) to activate or
•
interrupt steam output instantaneously when
pressed or released. This results in lower
EN