SOLAC PC1510 Instrucciones De Uso página 7

Plancha horizontal y vertical
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
energy consumption, as well as longer use
from the water tank (lower water consumption).
DRY AND/OR STEAM IRONING:
The appliance has a steam control trigger
(11) which, if not pressed, allows dry ironing
(without steam)).
Temperature setting 2 or 3 should be selected
in order to iron with steam
Steam
flow
depends
temperature: the higher the temperature, the
greater the steam flow.
Ironing can be done horizontally or vertically.
To activate automatic continuous steam,
engage the lock (12) on the steam trigger (11)
for greater convenience while ironing.
VERTICAL IRONING:
It is possible to iron hanging curtains, items
of clothing on their own hanger, etc. To do so,
follow these instructions:
Iron from top to bottom, if you wish to use
steam press the steam control (11), follow the
instructions given in the steam ironing section .
Important:
for
cotton
recommended to put the base of the iron
in contact with the material. For other more
delicate fabrics, it is recommended to keep the
base of the iron a few centimetres away.
AUTO-OFF FUNCTION (AUTO-OFF):
In order to save energy, the appliance switches
to auto-off mode if it is not moved for 3 minutes
or more. When this happens, 6 beeps are
emitted and the auto-off indicator light flashes,
indicating that this function is activated.
To resume operation just touch any button on
the appliance.
LOW WATER WARNING:
When the appliance has run out of water, a red
light flashes and it beeps 3 times, press the
steam button again and the low water warning
will disappear
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Unplug the appliance from the mains.
Remove the water from the water tank.
Clean the appliance
CLEANING
Unplug the appliance from the mains and let
it cool down before performing any cleaning
task.
Clean the appliance using a damp cloth with a
few drops of detergent and then dry it.
Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
to clean the appliance.
on
the
selected
Do not immerse the appliance in water or any
other liquid, or place it under a running tap.
*HOW TO DEAL WITH LIME SCALE
INCRUSTATIONS:
For the appliance to work correctly it should
be kept free of lime scale or magnesium
incrustations caused by the use of hard water.
To prevent this kind of problem, we recommend
the use of water with low lime or magnesium
mineralisation.
Homemade solutions, such as the use of
vinegar, are not recommended for de-scaling
this appliance and will result in the loss of
product warranty.
FAULTS AND REPAIR
and
linen,
it
is
In the event of a fault take the appliance to
an authorised Technical Support Service. Do
not try to dismantle or repair it, as this may be
dangerous.
If the mains cable has been damaged, it must
be replaced, proceed as in the case of a fault.
Do not use scented water, as this damages the
coating inside the steamer.
FOR EU PRODUCT VERSIONS
AND/OR IN THE CASE THAT IT IS
REQUESTED IN YOUR COUNTRY:
ECOLOGY AND RECYCLABILITY
OF THE PRODUCT
The packaging materials for this appliance
are included in a collection, classification and
recycling system. Should you wish to dispose
of them, use the appropriate public containers
for each type of material.
The product does not contain concentrations of
substances that could be considered harmful
to the environment
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido