Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HOW TO INSTALL
Install fridge in a convenient location away from extreme heat and cold. Allow
sufficient clearance between the fridge and side wall so the door will open
without obstruction. Fridge is not designed for recessed installation.
Select a space with strong level floor.
Allow 5 inches of space between the fridge's side and
the wall.
The appliance must be correctly connected to the
power supply.
POWER CORD REPLACEMENT
If the refrigerator's power cord is damaged, have it replaced by a qualified
repair agent.
WHAT TO DO ...
When the fridge is not in use for a prolonged period:
• Remove the power plug from the power point.
• Remove all contents from the fridge.
• Dry the interior and leave the door open for a few days.
When you wish to move the fridge:
• Secure all movable parts and contents. (Package them separately if
necessary.)
• Transport the fridge only in an upright position. In any other position you may
damage the compressor.
Before calling service, please follow the checklist below.
This may save you an expensive service call.
If the fridge seems too warm inside:
• Check that the door has not been opened too frequently or for long.
• Check that the interior circulation is not obstructed by having too many
goods stored. (The fridge is overloaded)
• Did you store anything hot, without first cooling it to room temperature?
• Is there sufficient clearance around all sides and above the fridge?
19
Publicidad
Capítulos
Tabla de contenido
