Attaching Stainless Steel Front Panel To The Drawer; Attaching The Strips; Adjusting The Door Spring - Bosch B36BT830NS Instrucciones De Montaje

6. Attaching stainless steel front
panel to the drawer
1. Hang stainless steel front panel over the double
threaded bolts.
2. Lower door panel and push the fixing brackets down
over the bracket screws.
3. When the freezer compartment door is closed,
check the depth of the stainless steel front panel
with respect to the adjacent furniture front panels.
If the depth alignment is correct, tighten the screws
on the fixing brackets.
4. Screw nuts onto the threaded bolts on top of the
door. Do not tighten yet.
5. Check lateral alignment of the stainless steel front
panel.
If the lateral alignment is correct, tighten the nuts.
22
7.

Attaching the strips

1. Attach the cover strips (a) & (b) on both vertical
sides of the doors and the freezer drawer.
2. Insert the cover plate on the freezer compartment
door.
8.

Adjusting the door spring

Rotate the adjusting screw with a cross-head
screwdriver.
I = maximum spring tension
0 = no spring tension