How To Turn Off Pressure Washer; How To Use Spray Gun - Ford FPWG30TA-J Manual De Uso

Pull cord recoils rapidly and pulls arm towards engine faster than you can let go which
WARNING!
could result in injury.
• Always relieve pressure from spray gun before pulling starter cord, including every failed attempt to start engine.
• To avoid recoil, pull starter cord slowly until resistance is felt, then pull rapidly.
Stopping Pressure Washer (See Fig 16)
• Turn the pressure regulator to depressurise the delivery pipeline.
• Turn the engine switch to the "OFF" position.
• Turn the fuel valve to the "OFF" position.
• Turn off water and squeeze the trigger handle to release all water pressure.
Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with
WARNING!
the controls.
Using the Spray Gun (See Fig 17 - 18)
• Flip the lock tab behind the trigger up or down until it clicks to apply or remove the safety. Pull back on the trigger to
begin operating pressure washer.
• To stop water flow, release trigger.
LOCK OUT
FIG 17
OPERATION
FIG 16
SLOT
17
TRIGGER
FIG 18