General Power Tool Safety Warnings - Ribimex Ribiland PRBAT20/CB Manual De Instrucciones Y Mantenimiento

Do not dispose of this product with household rubbish. Dispose of this product in the
nearest recycle centre. Please contact your local authority or local recycle centre for
further information for its safe disposal.
Battery packs/batteries should be collected, recycled or disposed of in an environmental-
friendly manner.
Battery packs/batteries contain substances that can pollute the environment. Do not
dispose of battery packs/batteries into household waste.
your local collection or nearest recycling point.
Please contact your local authority or local recycle centre for further information for its
safe disposal.
Explosion hazard! Protect batteries against heat and fire.
Do not throw into fire.
Protect the environment: do not throw batteries into water.
Do not throw into the environment.
Maximum ambient temperature: 45°C
Always charge the battery pack in ambient environment between +10°C to +40°C.

3.1- General power tool safety warnings

1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you
to lose control.
Do not let persons, especially children, not involved in the work touch the tool or its power cord or
the extension cord and keep them away from the work area.
Keep the product away from children or from their environment. Never allow children to operate the
tool. Children should be supervised to ensure that they do not play with the tool.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in serious personal
injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as
Do not burn.
Return exhausted batteries to
Page 22 / 91