Samsung WA54R7600A Serie Manual De Usuario página 60

Troubleshooting
Code
LC
OC
PC
PC1
Ub
Ur
60 English
Untitled-3 60
Check the drain hose.
• Make sure the end of the drain hose is positioned correctly.
• Make sure the drain hose is not clogged.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
NOTE
When the washer displays "LC", the washer drains for 3 minutes.
During this time, the Power button is inoperative.
Water overflowed.
• Restart after spinning.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
When position of the clutch can't be detected.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
After position of the clutch is detected, if the signal from the clutch
hall is incorrect.
• Turn off the washer, unplug it, wait one minute, and then plug
the washer in again. If the information code remains, contact a
Samsung customer service center.
Spinning does not work.
• Make sure laundry is spread out evenly.
• Make sure the washing machine is on a flat, stable surface.
• Redistribute the load. If only one item of clothing needs washing,
such as a bathrobe or pair of jeans, the final spin result might be
unsatisfactory, and a "Ub" check message will appear in the display.
Display for additional rinsing.
• Appears when additional rinsing cycle senses that tub is
unbalanced.
• Press any button/key to release the display.
Meaning
2019-06-24 PM 12:08:06