Mitsubishi AL2-10MR Manual Del Usuario página 19

α
2 Simple Application Controllers
Table 1.4: Each Part Name
Ref.
Mounting hole, φ4.2 mm
1
2 Power terminals
3 Input terminals
4 Mounting screw for the extension cover or extension module
5 Extension cover or extension module(AL2-14MR-*,AL2-24MR-*)
6 Groove for DIN rail mounting (Width of DIN rail 35mm <DIN EN 50022>)
7 DIN-RAIL mounting clips
8 Output terminals
9 Operation keys
10 Liquid crystal display
11 Programming port cover
Note;
• Refer to chapter 7 about dimensions of the AL-232CAB
• Refer to chapter 8 about dimensions of the AL2-GSM-CAB.
• Refer to chapter 9 about dimensions of the AL2-ASI-BD.
• Refer to chapter 11 about dimensions of the AL2-2DA.
• Refer to chapter 12 about dimensions of the AL2-2PT-ADP.
• Refer to chapter 13 about dimensions of the AL2-2TC-ADP.
Item Description
Introduction 1
ENG
ENG-5