HyperIce Normatec 2.0 Pro Instrucciones De Operación página 11

TURN OFF THE CONTROL UNIT
To turn off the system, press the power button and confirm that the green power LED is shut off.
USE ZONE BOOST
During your session, you can increase the intensity of a single zone with the Zone Boost
feature. Zone Boost is designed to be used when you want extra attention in a specific area.
Zone Boost will add an extra 60 seconds of massage time, as well as 10 mmHg increased
pressure, in the selected zone.
Activate Zone Boost: Tap the zone you wish to boost on the attachment graphic on the
home screen. Only one zone can be boosted at a time. Zone Boost is only available with the
patented NORMATEC PULSE massage pattern. Boosted zones will appear with the Zone
Boost indicator on either side of the boosted zone (Figure 1) on the control unit's home screen.
Deactivate Zone Boost: Tap once on the boosted zone.
USE CUSTOM MODE
When entering Custom Mode (only available when in the patented NORMATEC PULSE massage pattern) the time and
pressure is displayed to the right of each zone. Starting with zone 1, tap on the
that zone's settings. Use the
then tap the back button to return to the custom screen. Repeat for all zones that you wish to adjust.
Starting from the foot, hand, or thigh (depending on the attachment selected), each zone cannot be set more than 10
mmHg higher than the previous zone.
ADJUST THE REST TIME
Adjust the rest time by tapping on the menu icon in the upper left and selecting the advanced options button. On the next
menu, select the rest time option. The rest time adjustment screen will open. Use the
decrease the rest time between 15 and 90 seconds. This option can only be adjusted before a session starts. The default
rest time is 30 seconds.
CHANGE THE MASSAGE PATTERN
Adjust the massage pattern by tapping on the menu icon in the upper left and selecting the advanced options button. On
the next menu, select the massage pattern option. The massage pattern screen will open. Select the pattern you wish to
use. This option can only be adjusted before a session starts. The selected massage pattern is highlighted in blue.
and buttons on the subsequent screen to adjust the pressure and time for that zone, and
Figure 1: Example of zone
three boosted.
button to the left of the zone to adjust
and buttons to increase or
11