HyperIce Normatec 2.0 Pro Instrucciones De Operación página 9

• Step 2: Connect the hose connector to the air outlet on the Normatec 2.0 Pro control unit. The connector can only
be inserted in the correct orientation. Insert the connector firmly into the Normatec 2.0 Pro control unit until you
hear an audible "click."
• Step 3: Put the leg, arm, or hip attachments on. Find a comfortable position sitting, reclined, or lying down. If the
attachments have a zipper, be sure to zip up the attachments completely. Never try to use the system with the zipper
partially or totally unzipped—this could void your warranty. Only one set of attachments can be used with a single
control unit. When using more than one attachment, make sure they are both of the same type.
• Step 4: Connect the attachment connectors on each attachment to the junction box air outlets. The attachment
connectors can only be connected to the junction box in the correct orientation. Insert the attachment connectors
firmly into the junction box air outlets until you hear an audible "click."
• If only one attachment will be connected to the junction box, use the blocking plug located on the underside of the
junction box to block off the unused junction box air outlet. Press firmly to make sure the blocking plug is fully seated.
• Step 5: Press the power button on the Normatec 2.0 Pro control unit firmly for one second to turn on the system.
While the control unit is on, the green LED next to the power button will be lit up.
CHOOSE YOUR ATTACHMENT
Select the attachment you are using by tapping on the menu icon in the upper left, and selecting the attachment
option. Tap an attachment to select it. You can quickly identify which attachment is currently selected by looking at the
attachment graphic on the home screen.
ADJUST THE MODE
Adjust the mode by tapping on the menu icon in the upper left, and selecting the recovery mode option. The mode
selection screen will open. The active mode will be highlighted in blue. To change the mode, tap on the desired mode.
• Recovery Flush: Use Recovery Flush for a quick recovery session.
• Rehab: Use Rehab Mode to select pre-programmed sessions designed for specific applications. When you select
Rehab Mode, you will be prompted with additional options depending on which attachment you have selected.
• Custom: Use Custom Mode to program your own settings. See the Custom Mode section (page 9) for details on
how to use this mode. This option can only be adjusted before a session starts.
ADJUST THE INTENSITY
Adjust the intensity level of the session by pressing the level adjustment buttons on the left and right of the level indicator.
Intensity level 1 is the gentlest setting. The massage becomes stronger as the intensity level is increased. Intensity can be
adjusted while the session is running. When the level is adjusted during a session, the system will stop for 10 seconds and
the cycle will resume at the new pressure.
9