Replaying Music Titles; Title Selection - Monacor CD-112 Manual De Instrucciones

4 Deactivating the Automatic
Start Function
The CD player is provided with an automatic
start function: After switching on the unit and
reading in a sound carrier (CD, USB flash drive
or memory card) the replay of the first title
will start automatically . If you do not wish the
unit to start automatically [replay will not start
before the button PLAY/ PAUSE (11) is pressed],
deactivate the automatic start function .
WARNING To make this modification, the
unit must be opened by skilled
personnel only . Inexpert han-
dling may result in electric shock!
Always disconnect the mains plug from
the socket before opening the unit!
On the PCB with the power supply unit and the
audio output jacks there is a jumper (see arrow
in fig . 5) . The automatic start function is acti-
vated when the jumper is in the position AUTO
PLAY . To deactivate the function, re arrange the
jumper to the position MANUAL PLAY .
5 Setting Up and Connecting
the Player
The player is designed for installation into a rack
(482 mm / 19"); however, it can also be placed
as desired as a desktop unit . For rack installa-
tion, 1 rack space (RS = 44 .45 mm) is required .
Prior to making or changing any connections,
switch off the CD-112 and the units to be
connected .
1) Connect the outputs CD PLAYER OUT (18)
[L = left channel, R = right channel] via ca-
bles with RCA connectors to the CD player
inputs, e . g . on a mixer or amplifier .
2) Connect the mains cable provided to the
mains jack (19) first and then to a mains
socket (230 V/ 50 Hz) .
6 Operation
Switch on the player with the POWER switch (1) .
The display (5) will show Welcome
First the player will read the CD . If no CD
has been inserted, the player will read the USB
flash drive . If no USB flash drive has been con-
nected, the player will read the SD / MMC mem-
ory card . If no memory card has been inserted,
the display will show
NO DISC
6.1 Remote control
1) To insert the batteries (2 × 1,5 V, size AAA),
remove the battery compartment cover on
the rear side of the remote control . Insert
the batteries as indicated in the battery
compartment . Close the compartment with
the cover .
If the remote control is not in use for a
longer period of time, remove the batter-
ies to prevent any damage due to battery
leakage .
2) When you press a button on the remote
control, always direct the remote control
towards the sensor IR (7) . There must be
no obstacles between the remote control
and the sensor .
3) If the range of the remote control decreases,
the batteries are discharged and must be
replaced .
Discharged batteries must not be
placed in the household waste; al-
ways take them to a special waste
disposal, e . g . collection container at
your retailer .

6.2 Replaying music titles

1) Insert a CD with the lettering facing up into
the slot (4) until it is pulled in automatically
and / or
connect a USB flash drive to the USB port
(6) or connect a hard disk (with individual
power supply, if required) to the USB port
and / or
insert an SD/MMC memory card into the
slot SD / MMC CARD (2), the notched cor-
ner of the card facing up . To remove the
card, slightly push it in to eject the card
from the slot .
2) Select the sound carrier (CD, USB flash drive,
memory card) with the button FUNC (17),
if necessary .
3) After reading in the sound carrier, the first
title will start automatically . However, if
the automatic start function has been
deactivated (chapter 4), press the button
PLAY/ PAUSE (11) to start the first title . To
select other titles see chapter 6 .3 .
4) While replaying, the upper line of the dis-
play will show the replay symbol  on the
right . The lower line will show the number
(TR ...) of the current title and the time al-
ready played of the title (min . : sec .) . At the
far right, MP3 is shown for titles in
format or
5) For MP3 files, the following additional in-
formation will scroll in the upper line:
File – ...
Title – ...
Artist – ...
Album – ...
. Note: If an information is not available, the dis-
play will show
To activate / deactivate this information
scrolling through the line, press the button
ID3 (22) .
6) When you press the button DISPLAY (21)
.
on the remote control, various information
for MP3 files will be displayed in the lower
line of the display:
basic setting
The lower line will show the title number
and the time already played of the title .
first actuation of button
The file name will be displayed .
second actuation of button
The number of folders and the number
of titles will be displayed .
third actuation of button
return to basic setting
7) Press the button PLAY/ PAUSE to switch be-
tween replay and pause . In the pause mode,
the pause symbolwill be inserted and the
time indication will flash .
MP3
CDA for standard audio CDs .
instead of a name .
Unknown
8) To stop the replay, press the button STOP
(10) .
9) To eject the CD, press the button EJECT (12) .
The display will show
EJECT
be ejected and can be removed . If the CD
is not removed from the slot, the CD player
will pull it in again automatically after ap-
prox . 10 seconds .

6.3 Title selection

6.3.1 Direct selection of the title number
For direct selection of a title, enter its number
with the numerical keys (3) . To start the title,
press the button PLAY/ PAUSE (11) .
Examples:
Title number Keys
4 4, PLAY/ PAUSE
27 2, 7, PLAY/ PAUSE
135 1, 3, 5, PLAY/ PAUSE
Note: The player will arrange MP3 titles as follows:
1 . all titles without folder in the ROOT directory
2 . all titles in folders in the ROOT directory
3 . all titles in subfolders, etc .
The titles and folders will not be arranged in alpha-
betic order, but can be easily found with the search
function ( chapters 6 .3 .3 and 6 .3 .4) .
☞
6.3.2 Skipping titles
in forward / reverse direction
To skip one title or several titles in forward or
reverse direction, briefly press the button CUE
or REV (9) [repeatedly] .
Button CUE: to skip to the next title
Button REV: to return to the beginning of the
title currently playing . Each time the button
REV is pressed again, the unit will go back one
title at a time .
Note: Only press the buttons REV and CUE briefly,
longer actuation will result in fast forward or reverse .
6.3.3 Alphabetic search for MP3 titles
1) Press the button FIND (15) . A magnifying
glass symbol will flash on the left at the
bottom of the display . On the right of it,
the letter A will appear and in the upper
line of the display the name of the first file
beginning with the letter A .
2) Press the button CUE [forward direction]
or REV (9) [reverse direction] to select the
first letter of the desired file name . The nu-
merals 0 – 9 are also available . If there are
no file names beginning with certain letters
or numbers, these letters or numbers are
marked None .
3) If there are several file names beginning
with the same letter, select the desired letter
and keep the button REV or CUE pressed
until the letter starts flashing next to the
magnifying glass symbol . All file names be-
ginning with the letter will now be available
to be selected one after the other with the
button REV or CUE .
4) When searching, the display will always
show the number of the folder and of the
title on the right at the bottom . When you
have found the desired title, start the replay
with the button PLAY/ PAUSE (11) .
, the CD will
9