Floor Balance Adjustment; Adjusting The Gap Between The Upper Door - Beko GNE 134620 X Manual Del Usuario

Floor balance adjustment

A
If your refrigerator is unbalanced;
B
First unplug the product. The product
must be unplugged when making the
balance adjustment. There is the risk of
electric shock.
1
1- Ventilation cover is removed by
unscrewing its screws as illustrated in
the figure before the procedure. You
can balance your refrigerator by turning
the front legs of it as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction of
black arrow and raised when you turn in
the opposite direction. Taking help from
someone to slightly lift the refrigerator will
facilitate this process.
2. After the balance issue is remedied,
install back the ventilation cover and
fasten the screws.
3. Remove the screws fastening the
lower ventilation cover using a Philips
screwdriver.
4
2 3
Adjusting the gap between
the upper door
C
You can adjust the gap between the
fridge compartment doors as illustrated
in the figures.
Door shelves should be empty when
adjusting the door height.
C
Using a screwdriver, remove the
screw of upper hinge cover of the door
you want to adjust.
10
EN