Light Bulbs - GE ZEK938 Manual Del Propietário

Oven
NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.

light bulbs

CAUTION
bulb, disconnect electrical power to the oven
at the main fuse or circuit breaker panel.
Be sure to let the light cover and bulb cool
completely.
For your safety, do not touch a hot bulb with
bare hands or a damp cloth.
To remove:
1 Turn the glass cover counterclockwise
2 Using gloves or a dry cloth, remove the bulb
To replace:
1 Use a new 130-volt Halogen bulb, not to
2 Using gloves or a dry cloth, remove the bulb
3 Push the bulb straight into the receptacle
4 Place the tabs of the glass cover into the
For improved lighting inside the oven, clean the glass
cover frequently using a wet cloth. This should be
done when the oven is completely cool.
5 Reconnect electrical power to the oven.
Probe
The temperature probe may be cleaned with
soap and water or a soap-filled scouring pad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled scouring
pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
40
: Before replacing the
1/4 turn until the tabs of the glass cover
clear the grooves of the socket.
by pulling it straight out.
exceed 50 watts.
from its packaging. Do not touch the bulb
with bare fingers.
all the way.
grooves of the socket. Turn the glass cover
clockwise 1/4 turn.
Care and Cleaning
Wall Oven
Receptacle
Glass cover
Receptacle
Socket
Bulb
Tab
Use gloves
or cloth