Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation
Instructions
30" (76.2 cm) Built-In
Wall Oven
ZET1, ZET2
If you have questions, call 1.800.GE.CARES or visit our website at: ge.com
Before You Begin
Read these instructions carefully and completely.
e IMPORTANT-—save these
instructions for local inspector's use.
e IMPORTANT -observe
all
governing codes and ordinances.
¢« Note to Installer—Be sure to leave these
instructions with the consumer.
e Note to Consumer—Keep these
instructions for future reference.
e Proper installation is the responsibility
of the installer and product failure due
to improper installation is NOT covered under
warranty.
e NOTE—This appliance must be properly
grounded.
ATTENTION INSTALLER
All electric wall ovens must be hard wired
(direct wired) into an approved junction box. A
plug and receptacle is NOT permitted on these
products.
Parts Included
(Appearance may vary.)
Ce.
Cee
5/8" Wood
3/4" Wood
Screws
Screws
(8A8 x .625 truss-head
Phillips wood screws}
(8-18 x .750 flat-head
Phillips wood screws}
Metal Bottom
Trim Assernbly
31-10842
04-12
GE
Materials Needed
f x g
oS
0)
0)
Wire Nuts
Strain Relief Clamp for — Junction
1/2" conduit
Box
Ss
36" (91 crn) of
String
Tools Needed
(==
(6 Ce
1/8" Drill Bit and Electric
Phillips
or Hand Drill
Screwdriver
Adjustable Wrench

Publicidad

loading

Este manual también es adecuado para:

Zet2 serie