G20134; Kneading - TREVIDEA g3ferrari PASTAIO SHAKE Manual Del Usuario

correctly. Before connecting the plug, mount the proper
accessory.
- Before removing the accessories always turn off the
unit. Clean the accessories after each use.
- The use of non-original accessories may damage the unit
and invalidate the warranty.
- Never leave the appliance unattended while it is running.
- Disconnect plug from electrical outlet after use and
before install or remove any accessory.
- Do not immerse the main unit in water or other liquids;
clean it with a damp cloth.
WARNING!!! Do not overload the appliance. The
total weight of ingredients in the container cannot be
over 2.5Kg for soft dough, or 1.6Kg, in case of hard
pastes, like pizza paste, or 1.3Kg for fresh made pasta.
When using the blender attachment, do not insert fingers
or hair or clothes in the glass. Always close the blender
lid before operating
WARNING!!! Do not use the appliance as kneading
machine and as blender at the same time. This may
result in damage due to overload.
1. Transmission
4. Main housing
7. H accessory (mixer)
10. Cover and blender gear 11. Measuring cup

KNEADING

- Fit the container (5) in place by turning it in the direction of LOCK until it blocks.
- Raise the main body using the release lever (2). Install the accessory by entering the joint in the drive shaft
of the unit, and then turn the locking ring until it stops. Mount the lid (9) on the bowl.
- Place the ingredients inside the bowl. The total weight of ingredients cannot exceed 2.5 Kg, in case of soft
dough, or 1.6 Kg, in case of hard pastes, like pizza paste, or 1.3 Kg for fresh made pasta.
- Lower the arm by releasing the lever (2). Connect the plug into an electrical outlet.
- Start the product with the knob (3) and choose a speed between 1 and 6. It is advisable to use lower speed
at the beginning, and then go to higher speeds. If the dough is hard do not use high speeds.
CAUTION: To avoid overheating do not use continuously for more than 20 minutes; in this case
interval with at least 10 minutes of rest. Do not use the appliance without food inside the container.
- When the work is finished, stop the machine taking the knob (3) to "0"
After the process, release the arm with the button (2) and lift it, remove the accessory and the container with
food. Remove the dough using a spatula.
Clean the product by following the instructions you will find in "Cleaning" section.
DESCRIPTION G20134
2. Head release lever
5. Stainless steel bowl
8. Beater
3. Knob 6 speeds
6. Hook
9. Lid
12. Blender lid 14. Blender jar
11