Sprintus EEM 13 R Manual De Instrucciones página 4

Please read carefully the instruction manual and safety instructions before using.
Failure to observe the instruction-manual and safety instructions may cause damage or danger to
the operator and other persons.
The orbital-single disc EEM 13 R is characterized by its managebility and the simple handling.
This light weight machine with its compact design is ideal for small areas, in niches and on stairs.
The orbital drive provides effective cleaning and trouble-free, safeguarding control.
The complete accessory-package allows for cleaning and/or polishing hard-floors, as well as for
carpet cleaning.
Transportation is simple with the large non-marking wheels.
Standard accessory includes hard and soft disk brushes and a pad holder.
SAFETY
WARNING!
Risk of injury!
m This apparatus is not to be used by people (children
included) with reduced physical, sensorial or mental
capacities or without any experience and knowledge,
unless they did not receive instructions relative to the
use of the apparatus and are controlled by a person
responsible for their safety.
m Children should be controlled so that they didn't play
with the apparatus.
m The packaging components could constitute potential
dangers (as or example plastic bags): they must be kept
away from children's reach and from other people not
conscious of their actions.
m Any different use from that indicated in this manual
could constitute a danger, therefore, it must be avoided.
m Every part of the apparatus must be correctly assembled
before using it.
m Ensure that the socket conforms to the apparatus' plug.
m Ensure that the voltage indicated on the motor block
corresponds with the power that is intended to connect
the apparatus to.
Safety English
4 I
m Avoid positioning the suction aperture next to delicate
parts of the body such as eyes, mouth, ears, etc., while
the apparatus is functioning.
m Make sure that the machine is switched off before
plugging the power cord in.
m The apparatus is not suitable for areas protected against
electrostatic discharges.
m Use only the brushes supplied with the apparatus or
those specified in the instruction manual. Using other
brushes could jeopardize safety.
m When operating the rotating parts, (e.g. brush, disc
wheel, etc.) a danger exists when running over the
power supply line or extension cords, or even coming
into contact with them. The cable could be damaged
with substantial risk caused to the machine and to the
user.
m Don't leave the apparatus unattended while is in
function.