Product Description - DBI SALA 3M 8000095 Manual De Instrucciones

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA
(HC) Floor Mount Davit Bases attach to the floor of a concrete or steel structure and receive the mast of compatible 3M
DBI-SALA Confined Space Entry/Rescue Variable Offset Davits.
Figure 2 illustrates the components of the HC Floor Mount Davit Base specified in Table 1. The HC Floor Mount Davit Base is
comprised of a Davit Sleeve (A) with an attached mounting plate for securing the HC Davit Base to the floor. A Liner (B) inside
the Davit Sleeve allows the Davit to rotate freely in the Davit Sleeve.
HC Davit Base Specifications:
Dimensions See Figure 1 for HC Davit Base Dimensions
HC Davit Base 15.6 kg (34.4 lbs)
Weight
Compatibility The HC Davit Bases covered in this instruction are compatible with 3M™ DBI-SALA® High Capacity
(HC) Short Reach and Long Reach Davit Systems.
Component Specifications:
Figure 2
Reference Component
A Davit Sleeve
B Liner
Minimum Mounting Requirements:
Pullout Strength Per Fastener (M20 Recommended)
Moment Load for the Structure
Vertical Load for the Structure
;
Structure resistance validation and installation execution must be performed by a Qualified Person
Weight Capacities:
Material Handling Capacity
1 Qualified Person:
An individual with a recognized degree or professional certificate, and extensive experience in Fall Protection. This individual must be capable
of design, analysis, evaluation, and specification in Fall Protection.
Confined Space Entry/Rescue High Capacity Floor Mount Davit Bases. High Capacity
®
Table 1 – Specifications
Materials
8000095: Carbon Steel
8000096: Stainless Steel
High-Density Polyethylene
4
Finish:
Hot Dipped Galvanized
Shot Blast
35zzz.59 kN (8,000 lbs)
15.41 kN*m (136,400 in*lbs)
13.79 kN (3,100 lbs)
340 kg (750 lbs)
.
1