Product Description - DBI SALA 3M 8000089 Manual De Instrucciones

;
Prior to installation and use of this equipment, record the product identification information from the ID label in the
Inspection and Maintenance Log (Table 2) at the back of this manual.

PRODUCT DESCRIPTION:

Figure 1 illustrates the 3M™ DBI-SALA
High Capacity (HC) Core Mount and Flush Mount Davit Bases attach to the floor of a concrete structure and receive the mast of
compatible 3M DBI-SALA Confined Space Entry/Rescue Variable Offset Davits.
Figure 2 illustrates the components of the HC Core Mount and Flush Mount Davit Bases specified in Table 1. The HC Core Mount
Davit Base is comprised of a Davit Sleeve (A) and Liner (B). The Liner (B) inside the Davit Sleeve allows the Davit to rotate
freely in the Davit Sleeve. The HC Flush Mount Davit Base is comprised of a Davit Sleeve (A) with an attached mounting plate for
securing the HC Davit Base to the floor. A Liner (B) inside the Davit Sleeve allows the Davit to rotate freely in the Davit Sleeve.
HC Davit Base Specifications:
Dimensions See Figure 1 for HC Davit Base Dimensions
HC Davit Base 8000089, 8000090: 5.4 kg (11.9 lbs)
Weight
8000091, 8000092: 12.4 kg (27.3 lbs)
Compatibility The HC Davit Bases covered in this instruction are compatible with 3M™ DBI-SALA® High Capacity
(HC) Short Reach and Long Reach Davit Systems.
Component Specifications:
Figure 2
Reference Component
A Davit Sleeve
B Liner
Minimum Mounting Requirements:
Moment Load for the Structure
Vertical Load for the Structure
;
Structure resistance validation and installation execution must be performed by a Qualified Person
Weight Capacities:
Material Handling Capacity
1 Qualified Person:
An individual with a recognized degree or professional certificate, and extensive experience in Fall Protection. This individual must be capable
of design, analysis, evaluation, and specification in Fall Protection.
Confined Space Entry/Rescue High Capacity Core Mount and Flush Mount Davit Bases.
®
Table 1 – Specifications
Materials
8000089, 8000091: Carbon Steel
8000090, 8000092: Stainless Steel
High-Density Polyethylene
5
Finish:
Hot Dipped Galvanized
Shot Blast
15.41 kN*m (136,400 in*lbs)
13.79 kN (3,100 lbs)
340 kg (750 lbs)
.
1