Fixed Panel And Support Bar Installation - OVE ANTIGUA 48 Manual De Instrucciones

FIXED PANEL AND SUPPORT BAR INSTALLATION

1. Insert the fixed panel's bottom seal strip (N) at the base of the fixed panel (C). With a cutter, cut the surplus to
adequate size.
2. Insert the fixed panel (C) into the metal track (B). Do not fully tighten it as further adjustments may be required.
Note: The wall track (B) allows you to adjust the position of the fixed panel (C). Adjusting the depth and/or
giving the fixed panel a slight angle allows for precise alignment with the door.
3. Smoothly slide the guide (Q) at the bottom of the fixed panel (C) without securing.
4-5. Install the door stopper (E), door rollers (H), fixed panel's bracket (G) and the support bar anthors (D) onto the
support bar (F).
6. Loosely mount the support bar (F) onto fixed panel (C) using the brackets (G) and level it.
7. Mark the positions of holes of the sliding door guide (Q).
1
C
N
3
C
Q
5
D
D
C
6
F
G
10
2
B
C
4
E
H
F
G
7
Q