Glass Panel And Support Bar Installation - OVE ANTIGUA SP 32 Manual Del Usuario

GLASS PANEL AND SUPPORT BAR INSTALLATION

1. Insert the side panel's bottom seal strip (X) at the base of the side panel (Y). With a cutter, cut the surplus to
adequate size.
2. Insert the side panel (Y) into the metal track (B). Do not fully tighten it as further adjustments may be required.
Note: The wall track (B) allows you to adjust the position of the side panel (Y). Adjusting the depth and/or
giving the side panel a slight angle allows for precise alignment with the door.
3-4. Smoothly slide the guide (Q) and the
panel (Y) without securing.
5-7. Install the door stopper (E), door rollers (H), fixed panel's bracket (G),
bar anthors (D) onto the support bar (F).
8. Loosely mount the support bar (F) onto fixed panel (C) using the brackets (G) and level it.
1
Y
X
3
C
Q
5
E
H
F
G
side panel clamp
(W) at the bottom of the fixed panel (C) and the side
6
D
Y
V
10
side panel's bracket (V)
B
Y
W
7
F
D
C
and the support
2
4
Y
8
G