Adding Rinse Aid - Miele PFD 101 Instrucciones Breves De Manejo

en - Before using for the first time
 Place the funnel provided over the
salt reservoir and carefully fill with
dishwasher salt until the reservoir is
full. The salt reservoir holds up to
2 kg of salt, depending on the type of
salt used.
 Clean off salt residues from around
the salt reservoir opening. Next,
screw the salt reservoir cap on again
firmly.

Adding rinse aid

 Press the yellow button  on the lid
of the rinse aid reservoir.
The lid will spring open.
42
 Fill with rinse aid until the filling level
indicator (arrow) changes to a dark
colour while the door is horizontally
open.
The rinse aid reservoir holds approx-
imately 110 ml.
 Close the lid firmly until you hear it
click into place. Otherwise, water can
enter the rinse aid container during a
programme.
 Wipe up any spilled rinse aid. This
prevents excess foam developing
during the next programme.
You can adjust the rinse aid dosage
for best results.