Technical Specifications - IK MULTI Pro 2 Manual De Instrucciones

EN
1
FIELD OF APPLICATION
Range of sprayers equipped with the highest performance in terms of safety and ease of use. Designed to provide greater
durability and versatility for professional use against the most aggressive chemicals in various sectors (cleaning and
disinfection, construction, automotive and industrial warehouses and workshops, etc.). Particularly acid-resistant.
Given the great variety of products in the market, Goizper cannot guarantee the universal validity of its equipment. In any
case, we recommend using certifi ed chemicals.
2 SETTING UP & SPRAYING
1. Unscrew the sprayer head by turning it anticlockwise (Figure 2.1a). Fill the tank to the indicated maximum of 1.5L - 50oz
(Figure 2.1b).
2. Screw tightly to close.
3. Pressurise the device using strokes (approx. 15) (Figure 2.2).
4. To begin spraying, make sure the safety lock is off (Figure 2.3). Press the handle and, as you work, compensate for the
loss in pressure by making more passes.
5. Once the work is fi nished, activate the safety lock (Figure 2.4a) and release the pressure by pulling the safety valve
(Figure 2.4b).
6. If more than one appliance is used with different chemicals, use the identifi cation marker to identify the contents of each
appliance by placing it on the end of the handle (Figure 2.5a). To remove it, pull it in the direction shown by the arrows
(Figure 2.5b) using a tool or pointed instrument (Figure 2.5c).
3
MAINTENANCE
1. After each use, depressurise the sprayer (Figure 3.1).
2. Collect and dispose of the residual amount according to the legislation, prescriptions, and applicable regulations.
3. Clean the appliance with water.
4. In the event of obstruction of the nozzle, clean it with water and do not use metallic objects (Figure 3.2).
5. In order to prolong the life of the joints, regularly apply some drops of oil or grease on the moving parts (Figure 3.3).
6. To access the valve chamber (165), remove the cylinder guard by pulling it fi rmly (Figure 3.4).
7. To access the rod's O-ring (603), unscrew the piston and remove it until leaving visible the aforementioned O-ring (Figure 3.5).
8. Store the sprayer indoors protected from frost and extreme heat (between 5ºC and 30ºC (40ºF & 85ºF)) (Figure 3.6).
4
USES AND SAFETY REGULATIONS
1. Always follow the instructions and dosages on the packaging labels, that the manufacturer recommends for the chemical
product to be used.
2. To avoid any consumption of the product, do not eat, drink or smoke while preparing and spraying.
3. Do not spray on people, animals, electrical installations, fl ames, open fi re, or other sources of ignition.
4. In case of poisoning, consult your doctor, taking the chemical product packaging with you.
5. Never dispose of waste product or cleaning residues near water courses, wells, etc.
6. Use suitable safety equipment, mask, goggles, gloves, footwear etc in order to avoid contact of chemical products with
skin, eyes and mouth.
7. Read the instructions for the sprayer before its use. Do not modify the sprayer. Do not connect it to an external pressure
source (manual use only). Do not obstruct or strike the safety valve. Do not use the sprayer if it is damaged, deformed or
altered from its original shape. Store the sprayer protected from frost and extreme heat (between 5ºC and 30º C (40ºF
& 85ºF)). Should the hose, tank, handle or any of its connections be damaged, do not attempt to repair but replace the
items with new parts.
8. Keep sprayer out of reach of children.
9. Use the device only with compatible substances (Scope of Application).
10. The safety valve should not be removed.
11. Never purge nozzles or valves by blowing with your mouth.
12. Use only spare parts and accessories from the manufacturer.
13. We will not be held liable for any damage caused by the use of foreign parts.
14. Depressurise the tank completely before fi lling, after use and before carrying out work relating to maintenance.
15. Once the spraying work is fi nished, lock the handle to avoid any involuntary operation.
16) STATE OF CALIFORNIA PROPOSTION - PROP 65 WARNING: This product can expose you to one or more chemicals,
including lead, which is known to the State of California to cause cancer and reproductive harm. Wash hands after
handling. For more information go to www.p65warnings.ca.gov
5

TECHNICAL SPECIFICATIONS

- Total capacity: 1.9 l. – 64.2 Oz
- Useful capacity: 1.5 l. – 50 Oz
- Net weight: 0.56 Kg. – 1.23 lbs.
- Gross weight: 0.7 Kg. – 1.54 lbs.
- Maximum pressure: 2.5 bar - 42 psi.
- Litres/min. 3 bar (43.5 psi): 0.50 l/min - 1 pint/min.
- Seals and materials resistant to most acids and solvents.
- Strong translucent tank with level indicator.
- Innovative and ergonomic design.
- Base for greater stability.
- Large fi lling aperture.
- Safety lock.
- 2.5 bar (42 psi) safety valve with depressurization option.
- Protective sleeve for valve chamber.
- Easy assembly and taking apart for cleaning and
maintenance, tool free.
- Adjustable cone nozzle and standard fan nozzle.
- Ability to identify content via coloured caps.
- Storage of nozzles inside the coloured caps.
- Option of fi tting other types of nozzles and accessories.