Conceptronic CKVM2P Guía De Instalación Rápida página 10

ENGLISH
4. KVM Switching Explanation
4.1 Basic Switching Explanation
It is possible to switch between your computers in 2 different ways:
Use of the PC-1 & PC-2 selection switch (shown in chapter 2.1).
o
By use of the keyboard hotkey "Scroll-lock" + "Scroll-lock" + "Arrow Up" or "Arrow
o
Down".
4.2 Advanced Switching Explanation
In the table below you will find the advanced switching features of the KVM Switch.
Command
Select PC
Select Higher PC
Select Lower PC
Bind PC + Audio Channel
Unbind PC + Audio Channel
Select Audio Channel
Start Autoscan
Stop Autoscan
Enjoy the use of your Conceptronic 2-Ports PS/2-KVM Switch !
Hotkey
ScrLk + ScrLk + ( )
x
(x can be 1 or 2)
ScrLk + ScrLk + [Arrow Up]
ScrLk + ScrLk + [Arrow Dwn]
ScrLk + ScrLk + [Q]
ScrLk + ScrLk + [W]
ScrLk + ScrLk + [F
ScrLk + ScrLk + [S]
[Press any Key]
Description
Select a PC Channel
Select the Higher PC Channel
Select the Lower PC Channel
Bind the PC and Audio Channel
(Default Setting)
Unbind the PC and Audio Channel
] Select an Audio Channel
x
(if Audio is not binded to PC Channel)
Start Auto scanning all Channels
(scan delay = 5 seconds)
Terminate Autoscan Function
10