Sony KD-65A8 Instrucciones De Instalación página 18

Note
 We recommend you to check the
position of TV in the viewing
environment.
2
Align to the wall and
WM1
make four marks.
WM1
Note
 Use a level to check whether
3
Drill pilot holes on the marks.
WM1
is level.
75 mm
10 mm
− 18 (GB) −
4
5
Install
WM1
suitable screws (not supplied)
and washers (not supplied).
Note
 Use a level to check whether the Wall-Mount Bracket
is level.
Precaution
 Do not over-tighten wooden screw 8 mm × 60 mm.
Improper tightening could reduce the holding power
of wooden screw 8 mm × 60 mm.
6
Pull out the arm of the bracket
to the end.
on the wall using
8 mm × 60 mm