Cequent Performance Products 76171 Instrucciones De Instalación página 4

1. Remove mud flap and bottom appearance panels – remove mud flap on driver side if present. Use phillips screwdriver, panel removal tool, and 10 mm socket to remove
(4) rivets, and (2) screws from bottom appearance panel on driver side. Use panel removal tool to remove (2) rivets from small plastic panel above exhaust tip on passenger
side, see Figure 2. Keep all fasteners and panels for reinstallation.
Model with mud flap
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico Sheet 4 of 18 76171NP 06-08-17 Rev. A