Beko MWB 2000 EX Manual De Instrucciones Del Propietario página 12

5. Auto-menu
You only need to select the food type and
weight, it will help you to automatically
adjust the power and time.
Example: Auto cooking 400g meat.
a) Press " " button to choose A-3.
b) Rotate the knob "Time setting" to set
weight 400g.
c) Press " ".
6. Memory cooking function:
This function can memorize some useful
cooking programes to avoid reseting time
and power operation.
a) If no memory has been set press " "
"1" will be displayed, input cooking
power and time, press " " again, the
set program will be menorized. If you
press " " instead of " " button, the
oven will start work, and the program
also will be menorized.
b) It there is any memory has been set
already, when you press " " button,
"1" will be displayed, the oven will
operate according to the memorized
program after you press "
The progrume will not be kept when the
electrity is off.
7. Clock
The oven can be used as a clock.
Example: To input current time 16:30
A) Press " ", the clock symbol will
flash in display. Rotate the "Time
setting" knob to set "16:00".
B) Press " " again, rotate the "Time
setting" knob to set "16:30"
C) Press " " again, the clock setting is
finished, the time start to go on
working.
8. Timer
The timerfunction helps the microwave
oven begin automatic cooking at set time,
and automatically stop operation after
finishing cooking. (You should set the
clock before using timerfunction).
Example: The current time of microwave
oven is 16:30, to set cooking at 18:15 on
70% power for 10 minutes.
A) Press "
(same procedure as setting clock).
B) Press "
C) Input cooking time 10 minutes by
rotating the knob "Time Setting".
D) Press "
If you don't set power and cooking time
(omit B and C steps), and directly press
" " button, the microwave oven will work
only as a clock, there will be 10 beeps at
18:15, but no other function will run.
9. Child-safety lock
To activate the child safety lock, press
" " and " " button at the same time for
2 seconds.
Press "
" button.
time for 2 seconds again, it will unlock this
function.
10. Pause/cancel
a) In the course of operation, pressing
"
b) If any program was set before
pressing start, pressing this button
will cancel all the set program.
12
EN
" and set time to18:15
" to set 70% power.
".
" and " " button, at the same
" button will stop operation.