Motorised 720P WiFi iP caMera
Symptoms
Poor quality or shaky image
Motion detection is triggered
unnecessarily
1 - GENERAL CHARACTERISTICS
Power supply
Network interface
Wireless network interface
Optical sensor
Minimum luminous intensity
Night vision
Lens
Buttons
Video compression
Resolution
Audio
Motors
Operating temperature and
humidity
Storage temperature and
humidity
Possible causes
Incorrect video settings
Unsuitable motion detection
settings
i - TECHNiCAL ANd LEgAL iNFOrMATiON
5VDC / 2000mA
Ethernet 10/100, audio-MDIX, RJ45
IEE 802.11b/g/n
¼'' cMos
0 lux
Manual or automatic (dusk-to-dawn sensor) - Range: 10m
F: 3.6mm
Reset button: restores factory settings
h.264, Angle of view: 56°
Primary stream: up to 1280x720 pixels
Secondary stream: up to 640x352 pixels
Built-in microphone and loudspeaker for two-way audio
communication
Motors for controlling tilt (90°) and rotation (345°) of the lens
0°C to 40°C, 20% to 85% RH, non-condensing
For indoor use only
-10°C to 60°C, 0% to 90% RH, non-condensing
H - FAQ
Solutions
Test the "flux secondaire
[secondary stream]" to confirm,
check the video settings and
reduce the quality if necessary
Reduce the trigger sensitivity or
limit the area being covered
en
15